So easy to install, it practically installs itself.


Hourwall is the most realistic simulated concrete, reclaimed wood and vintage brick panel on the market (pronounced ‘period’). But just as important as the look is the ease of installation. Hourwall is super easy to cut and install. Installs easily onto drywall, wood, and almost any other substrate using nails, screws, or glue. Amazingly realistic, fast, simple, and with little mess = allowing you to transform a room in minutes. All of this has been created with everyone in mind, from designers and architects, to weekend warriors!



install instructions

view

spec sheet

view

helpful hints

view

Quick Install Tips



classicBRICK

install panels from right to left, ensuring panels are level.

cut panel(s) to sit flush to the wall or ceiling.

start each row with a new or unused panel, ensure that the bricks have the correct pattern.

fill screw holes with filler & use Hourwall Paint Kit to finish. if finishing nails were used, you may skip this step.

urbanCONCRETE

install panels from right to left, ensuring panels are level.

cut panel(s) to sit flush to the wall or ceiling.

start each row with a new or unused pane, ensure that circles are lined up horizontally.

fill screw holes with filler & use Hourwall Paint Kit to finish. if finishing nails were used, you may skip this step.

barnWOOD

install panels horizontally or vertically, ensuring panels are level.

cut panel(s) to sit flush to the wall or ceiling.

use the ‘cut off’ piece from the previous row to start the next row, offsetting the panels as you go.

for a more salvaged look, try cutting lengthwise for thinner panels, and/or vary the lengths of the panels.